Universal Prop Puller
ITEM NO. 90-870
Works well with 2 or 3 blade props up to 13" in diameter. Has a single
Maximum prop shaft size: 1"
Maximum prop diameter: 13"
HOW TO USE
- After positioning the Prop Puller, tighten the prop puller bolt into the
end of the shaft until snug, the tighten an additional 1/2 turn.
- Using a hammer, solidly hit the end of the prop puller bolt. This is done
to "shock" the prop free of the shaft. If needed, tighten the prop
puller bolt 1/2 turn and repeat.
Note: Tightening the prop puller bolt alone will not free the prop from the shaft. Doing so will break the prop puller, which voids all warranties.