Wanderlust
|
a 19' day cruiser
|
Build in PLYWOOD
|
Characteristics
|
Length overall
|
19'-0"
|
Beam
|
7'-10"
|
Hull draft
|
9" (with skeg)
|
Hull depth
|
3'-7"
|
Hull weight (approx.)
|
950 lbs.
|
Height overall
|
6'-3"
|
Cabin headroom
|
4'-6"
|
Cockpit size
|
6'-2" x 8'
|
Sleeping accommodations
|
2
|
Hull type: Vee bottom, hard chine, developed for sheet
plywood planking.
Power: Single or twin short shaft outboard motors to
150 hp total. Long shaft motor can be used if transom
modified. Optional power, single stern mounted inboard
motor to 700 lbs connected to an outdrive.
Can the hull be extended or shortened? Extended: No.
Can be shortened up to 10% by re-spacing the frames
from the aft end of the stem to the transom a
proportional amount. We do not recommend increasing the
beam.
Trailer: Designed for use with Glen-L Series 3800 boat
trailer plans.
|
The WANDERLUST was designed to maximize work space. Scuba
divers and fisherman will appreciate the huge 6'-2" x
8' cockpit where you have lots of elbow room for fishing or
putting on your gear. The cabin offers a snug place to get in
out of the weather, and sleeps two in generous 6'-6"
vee berths. The cockpit can be utilized for sleeping by guests
with sleeping bags. There is space to stow a portable toilet
under the berths.
The hull is made from 3/8" sheet plywood with sawn frames,
making her both rugged and lightweight. At the bow the planking
forms a generous vee to give a softer ride. The bottom flattens
out aft to reduce resistance to allow the boat to plane quickly.
The bottom shape also gives a stable platform for fishing, and
plenty of hull depth makes this a safe boat for the entire
family. Power can be supplied by either an outboard or an
inboard with an outdrive. With sufficient power, the WANDERLUST
can easily pull skiers.
Because of the current interest in classic runabouts and
cruisers, the WANDERLUST is frequently finished with natural
finishes on the deck and cabin, and with shiny chrome hardware
to make her into a real show stopper.
|
|