"POXY-GRIP" EPOXY STRUCTURAL ADHESIVE

This superior waterproof marine glue is formulated specifically for the boatbuilder, whether amateur or professional. POXY-GRIP is easy to use, requiring equal parts of resin and hardener (1:1 ratio). Use on all types of wood, most metals, and some plastics. It is completely compatible with the GLEN-L Epoxy Encapsulation System.

POXY-GRIP cures below 40° F (although more slowly), and is suitable for high humidity or on woods with relatively high moisture content since it does not absorb moisture during cure. The resin component is nearly water clear, while the polyamide hardener is amber color. Cured joints are clear, becoming virtually invisible. Ideal for use under clear finishes.

Bond strength remains high even when bridging reasonable gaps. Heavy clamping pressure and fillers are not required. Just hold the mating parts stationary until cure takes place. The product does not run. Pot life, in a container with a large surface area, is about 30 - 40 minutes at 70° F. Partial cure in 6 to 8 hours, full strength in about 24 hours at 70° F. POXY-GRIP is also ideal for automotive, aircraft, and hobby use. Comes in metal cans and is free of noxious odors. A Quart Kit should be adequate for small dinghies or boats to about 10'. A Half-gallon Kit should be enough for boats in the 12' - 14' range. A Gallon Kit should suffice for boats to about 18'.