Simplicity in epoxy adhesive use has finally arrived! Just drop System Three's new cartridge into a standard size caulking gun (not included), add a mixer tip and squeeze and apply. What could be easier? Only need a little bit and don't want to use a tip? Then squeeze out some into a cup, mix and apply. In either case the cartridge properly measures the resin and hardener and can never get the ratio wrong. After you're done put the cap back on and the cartridge is ready to go whenever you next need it.

Comes with one mixer tip.

We offer the following products: QuickCure 5, T-88 Structural Adhesive and SilverTip GelMagic in the U-TAH Cartridge. QuickCure 5 is our quick setting epoxy adhesive. With QuickCure 5, you will have 2-3 minutes of working time and your joint will be tack free in 5-minutes. Our structural epoxy adhesive, T-88, is also available in cartridges for jobs that require longer pot life and overnight cure. If your application requires a sag-resistant adhesive, SilverTip GelMagic is for you.

With the U-TAH Cartridge there is never any need to measure the part A and the part B. The dual chambered cartridge does that for you and the Mixing Tips blend the resin and hardener as the product is dispensed there is never any need to mix. If you'd prefer to dispense into a cup or other mixing vessel, use our convenient Ratio Check Cap (great for mixing small quantities). If you have never applied epoxy products with a dispensing gun you will be amazed when you try our new U-TAH Cartridge. They take all the measuring and mixing out of the process of using epoxy. All you have to do is point and shoot. The mixing tip will put the precise amount of epoxy exactly where you want it with no mess and minimum waste.

Please choose product from the drop down list above.